Depth Capacities
| Dry Hole (m)* | Wet Hole (m)* | |
|---|---|---|
| PWL | 650 | 800 |
| HWL | 1.000 | 1.150 |
| NWL | 1.500 | 1.700 |
| BWL | 1.900 | 2.200 |
(*) Depth capacity is given according to standard QWL rods. Depth capacity might be increased while using the rods which have light weight V-wall or different thread design.
Power Unit (107 cc)
| Power | 110 kW (148 HP) |
| Engine Type | Electric Engine |
EMTAS, Siemens or ABB electric engines are using our production.
Torque & RPM Rating
Extreme duty gear driven head power by 4 speed transmission with hydraulic sliding.
| Gear Ratio | Speed (RPM) | Torque (Nm) |
|---|---|---|
| 1. 6.27:1 | 122 - 199 | 5.322 - 3.254 |
| 2. 3.12:1 | 246 - 400 | 2.648 - 1.620 |
| 3. 1.75:1 | 439 - 714 | 1.620 - 908 |
| 4. 1.00:1 | 714 - 1.250 | 849 - 519 |
Lubrication Unit
Hydraulically driven cooled oil circulation with 25 micron suction filter.
Chuck Assembly
| Tip | 7 Jaws - Hydraulic open, spring closed |
| Maximum Inside Diameter | 120 mm (PWL) |
| Holding Capacity | 19.000 kg |
Hydraulic System (@1.450 RPM)
| Max. Flow Rate | Max. Pressure | |
|---|---|---|
| Primary Pump | 179 L/min | 300 Bar |
| Second Pump | 72 L/min | 230 Bar |
Hydraulic Oil Cooling
Hydraulic and rotation oil are cooling by air.
Mast and Feed System
| Drilling Angle | Vertical to horizontal |
| Dump Stroke | 1,00 m (According to mast axis) |
| Feed Travel | 1,80 m |
| Telescopic Mast | 1,50 m (Open and close by hydraulic feed cylinder) |
| Feed Speeds | Fast and slow with variable controls |
| Maximum Pull | 16.000 kg |
| Maximum Push | 12.750 kg |
Standard 3 m pull, angel hole, telescopic mast for ease of set up, ST 52-3 profile.
Main Line Hoist
| Capacity | 1.000 kg (Single line) |
| Cable Size | 16 m x 16 mm rope |
| Line Speed | Bare drum 35 m/min |
Wireline Hoist
| Capacity | 2.000 m x 4,6 mm |
| Line Pull | Bare drum: 1.870 kg Full drum: 545 kg |
| Line Speed | Bare drum: 138 m/min Full drum: 474 m/min |
Hydraulically driven with integral counter balance valves.
Rod Clamp
Capacity: 25.000 kg Hydraulically powered N, H, P and S wireline rod jaw sizes.
Water Pump
Hydraulically driven 835 water/mud pump Maximum Flow Rate : 35 gpm @ 800 psi
Weight
Crawler mounted weight : 10.000 kg
Drill Base Supports
Skid mounted or crawler, supports 4 hydraulic leveling jacks.
Dimensions
4.900 mm, 2.665 mm, 2.150 mm
Warranty
1 year against faulty workmanship individual manufactures warranty on all components as per our terms and condition of sale.
Options
Rod spinner, Rod holder, Rod loader, Swiveling control panel, Remote control panel, Mast ladder, Enclose operator cabin, Engine service information connection, Warning horn to alert drill crew, Fire suppression unit, Water flow meter, Hydraulic oil reservoir fill pump, Wireline hoist self levelling system
These technical specification are based on theoretical engineering calculations. Actual capacity will depend on specific drilling conditions and materials. GEO Drilling Machinery Ltd. reserves the right to change or make modifications to designs and specifications without prior notice or obligation.
GEO Drilling Products
Our Products From Our Unique Capabilities
-
Drill Rigs
-
Wireline Coring System
-
Drill Rod & Casing
-
Drill Bit & Reaming Shell
OUR COMPANY WORKING PROCESS
Get Your Service in 4 Steps
-
01
Review And Analysis
With our deep experience in the sector, we carry out detailed examination of machines and equipment. -
02
Procurement Service
Using the experience we have gained since 2010, we offer cutting-edge and economical solutions to the drilling industry. -
03
Installation and Construction
We are at your service with our expert team in the installation of drilling machines and equipment. -
04
Customer Satisfaction
We always prioritize customer satisfaction with our innovative and need-oriented products.
Photo Gallery
